6-13 Uploading and Verifying Device Parameters
6-13-4 Verifying Device Parameters
Using the Edit Device Parameters Dialog Box
Component - Parameter - Edit-Compare Button
To compare the parameters through the Edit Device Parameters Dialog Box, use the
following procedure.
1. Place the CX-Integrator online.
2. Select the device.
3. Edit Component - Parameter - Edit.
4. Click the Compare Button.
5. The following confirmation dialog box will be displayed.
6. Click the Yes Button.
The progress dialog box will be displayed and the comparison results will be
displayed.
6-61
To Next Page
Loading...
Need help?
General