1-6 Menus
1-6-2 Pop-up Menus
1-6-2 Pop-up Menus
Online Connection Information Window
Pop-up Menu for the Relay PLC's Communications Settings
The following pop-up menu will be displayed if you right-click the relay PLC’s
communications settings line (starting with Offline) in the Online Connection Information
Window.
Pop-up menu item Description Offline Online
Work Online Connects to the relay PLC using the device
type settings on the computer.
OK No
Auto Online For a serial connection, automatically
connects using the communications settings
in the PLC. (The device type settings of the
connected relay PLC will be uploaded.)
OK No
Edit Communication
Settings
Used to change the device type settings of
the relay PLC on the computer. The Change
PLC Dialog Box is displayed.
OK No
Note: The following will be displayed when online.
Pop-up menu item Description Offline Online
Offline Closes the connect and places the
CX-Integrator offline.
No OK
Pop-up Menu for Target PLC Online
Pop-up menu item Description Offline Online
I/O table Starts the I/O Table Component. No OK
Error Log Starts the PLC Error Component. No OK
Mode Setting Changes the operating mode of the CPU Unit No OK
Start Routing Table Starts the Routing Table Component. No OK
Echoback test
between PLC nodes
Starts the echoback test for checking the
communications status of the network.
No OK
1-39
To Next Page
Loading...
