2 Insert the USB memory stick or SD card into the Sensor Controller.
Precautions for Correct Use
Make sure that the software data file has been stored into the USB memory stick or SD card.
Otherwise, the update may not be successfully completed.
3
Select the System information on the Function drop-down menu and click Version-up.
4
Determine a version-up tool to launch.
• Verup.exe is just under the external storage:
Just click OK when using the version-up tool just under the external storage. When using an-
other version-up tool, click Select file on the dialog and select Verup.exe.
• Verup.exe is not just under the external storage
Select Verup.exe by FileExplorer.
3 Basic Operations
3 - 40
FH/FHV Series Vision System User’s Manual (Z365-E1)
To Next Page
Loading...
