112 LD-60/90 Platform User's Manual 11970-000 Rev M
7.4 Operator Panel
NOTE: This is not the same as the Touchscreen option.
Default/Sample Screen Contents
The following image shows the first screen that appears during boot-up:
Figure 7-5. Initial Boot Screen
After the platform boots up, you will see the main screen:
Figure 7-6. Main Screen Fields
Callout Description Callout Description
A WiFi Signal Strength D Battery Level
B IP Address E Robot ID
C Status/ Faults/ Instructions (up to
six lines)
l
The main screen can display up to six messages, in order of importance.
l
The main screen will display only one fault at a time.