20 LD-60/90 Platform User's Manual 11970-000 Rev M
1.4 How Can I Get Help?
NOTE: You can use a web browser to connect directly to the SetNetGo OSon a
platform. This allows your IT support to set up the network for you, without
using MobilePlanner, which requires a license.
1.4 How Can I Get Help?
Refer to the corporate website:
http://www.ia.omron.com
Support
If, after reading this manual, you are having problems with your platform, contact your local
Omron Support.
Related Manuals
This manual covers the installation, setup, operation, and maintenance of an LDPlatform
OEM. There are additional manuals that cover configuring the platform. See the following
table. These manuals are available on the software media delivered with your system.
Table 1-1. Related Manuals
Manual Title Description
Mobile Robot LD Safety
Guide (Cat. No. I616)
Contains general safety information for all Omron Robotics and
Safety TechnologiesLDPlatform OEM-based AMRs.
FLOW Core User's Guide
(Cat. No. I637)
Covers MobilePlanner software, the SetNetGo OS, and most of
the configuration of an LDPlatform OEM.
EM 2100 Installation
Guide (Cat. No. I634)
Covers the Fleet Manager 2100 system, which is hardware and
software used for managing a fleet of AMRs.
LDPlatform Peripherals
User's Guide(Cat. No.
I613)
Covers peripherals, such as the Touchscreen, Call/Door box, and
Acuity Localization options.
Integrated Toolkit User's
Manual (Cat. No. I637)
Contains information that is necessary to use the Integration
Toolkit facilitating integration between the Fleet Manager and
the end user's client application.
Including a Debuginfo File
If the platform has been set up on a wireless network, skip to SetNetGo Access.
Network Setup
If the platform has not been set up on a wireless network, you will have to set up a local area
network on a separate PC, configured to talk to the platform over a TCP/IP port. Set the IP
address to: 1.2.3.5. The Subnet Mask should be 255.255.255.0.
To Next Page
Loading...
