Chapter 8: Maintenance
Figure 8-3. Bottom of Battery Door Skin. (A) Lift Here
8.4 Safety Inspection
Warning Devices
Do weekly inspections of the following warning devices for proper function.
Flashing Light
Each AMR must have a readily visible flashing light, to serve as a warning whenever the
AMR is ready to move or is moving. The exact nature of this light will vary depending on the
design of the payload structure. Maintenance should be done to ensure the proper function of
any user supplied lights.
Light Discs
Every week, check the light discs on each side of the AMR for proper function.
Buzzer
Check the warning buzzer for proper function. To comply with applicable standards, it is
important that the buzzer be audible in all operating conditions and environments.
Warning Labels
Check all warning labels on the AMR every week for presence and legibility. Replace any
labels that are missing or illegible. The labels, with our part numbers, are:
11970-000 Rev M LD-60/90 Platform User's Manual 129
To Next Page
Loading...
