136 LD-60/90 Platform User's Manual 11970-000 Rev M
8.7 Replacing Non-Periodic Parts
Figure 8-5. Lifting the Battery
The connectors for power and data go toward the rear of the platform.
4.
Attach the battery power and data cables to the connectors at the rear of the battery.
Figure 8-6. Battery Cable Connectors, (A) Power and (B) Data
5.
Close the battery compartment door to secure the battery in place.
Closing the battery compartment door holds the battery tightly in place to keep it from
shifting inside the compartment.
6.
Reinstall the battery door platform skin.
8.7 Replacing Non-Periodic Parts
Replace the following parts on an as-needed basis.
To Next Page
Loading...
