Omron LD-90 - Page 68

68 LD-60/90 Platform User's Manual 11970-000 Rev M
5.2 Considerations
Figure 5-2. PlatformDeck Dimensions, with M6-threaded Holes (units are mm)
Callout Description
A Upper Mounting Surface
B 24x M6 Threads
C Lower Mounting Surface 40.7 [1.60] below Upper Surface
In the preceding figure, all of the M6 self-clinching nuts (B)have a torque limit of 3 N·m .
!
CAUTION: PROPERTYDAMAGE RISK
Do not exceed this torque when attaching your payload structure to these self-
clinching nuts. See NOTEthat follows.