Omron NX-SID Series User Manual

2 Click the Execute Button. The Clear All Memory Confirmation Dialog Box is displayed.
3 Click the Yes
Button. The Authentication Dialog Box is displayed.
4 Enter the password, and click the OK Button. If a password is not set, leave the box empty and
click the
OK Button.
A dialog box is displayed to confirm the node.
5 Click the Yes Button. The following dialog box is displayed.
6 Click the OK Button.
7 Checking Operation and Actual Operation
7 - 69
NX-series Safety Control Unit User's Manual (Z930)
7-14 Restarting and Clearing All Memory
7
7-14-2 Clear All Memory Operation

Omron NX-SID Series Specifications

General

Brand	Omron
Model	NX-SID Series
Category	Controller
Language	English