3 Configuring Axes and Axes Groups
3-14
NJ/NX-series CPU Unit Motion Control User’s Manual (W507)
1
Right-click Axis Settings in the Multiview Explorer and select Motion Control Axis or Single-
axis Position Control Axis from the Add Menu.
Single-axis Position Control Axis is displayed for the NX102 CPU Unit and NX1P2 CPU Unit.
An axis is added to the Multiview Explorer. The default name for the new axis is MC_Axis000.
Copying an Axis
You can also add an axis by copying the axis settings for an existing axis.
Adding Axes
To Next Page
Loading...
