Omron Varispeed E7 User Manual

User Parameter Tables
5-43
U1-39
MEMOBUS
communications
error code
Shows MEMOBUS errors.
(Cannot be output.) – 66H
U1-40
Cooling fan oper-
ating time
Monitors the total operating time
of the cooling fan. The time can
be set in o2-10.
(Cannot be output.)
1
hr.
68H
U1-51
Frequency refer-
ence at AUTO
operation
Monitors the value of the fre-
quency reference when AUTO
operation is active.
10 V: Max. frequency
0.01
%
72H
U1-52
Frequency refer-
ence at HAND
operation
Monitors the value of the fre-
quency reference when HAND
operation is active.
10 V: Max. frequency
0.01
%
73H
U1-53 PI feedback 2
Monitors the feedback value of
the PI fdbk2 input when Differen-
tial PI is selected (H3-=6B)
10V: 100% feedback value
0.01
%
74H
*1. The monitor parameter can be scaled in o1-03, the unit can be set in o1-09.
*2. The monitor parameters will be moved up to 2nd and 3rd position when the PI controller is enabled.
*3. The monitor parameter can be scaled in b5-20, the unit can be set in b5-31.
Param-
eter
Number
Name Description
Output Signal Level During Multi-
Function Analog Output
Min.
Unit
MEMO-
BUS
Register
1: CRC error
1: Data length erro
r
Not used
(always 0)
1: Parity error
1: Overrun error
1: Framing error
1: Timeout
Not used
(always 0)

Omron Varispeed E7 Specifications

General

Brand	Omron
Model	Varispeed E7
Category	Inverter
Language	English