Omron Varispeed E7 User Manual

Digital Operator Functions
6-115
Writing Parameter Set Values Stored in the Digital Operator to the Inverter (COPY)
To write parameter set values stored in the Digital Operator to the Inverter, use the following method.
If a fault is displayed press any key to clear the fault display and return to the o3-01 display. Fault displays and
their meanings are shown on the following page.
Step
No.
Digital Operator Display
Explanation
LED Digital Operator LCD/HOA Digital Operator
1
Press the MENU key until the Advanced Pro-
gramming Mode is reached.
2
Press the DATA/ENTER key to enter the Func-
tion Selection Display in Advanced Program-
ming Mode.
3
Scroll to parameter o3-01 (Copy Function
Selection) using the Increment key and Decre-
ment key.
4
Press the DATA/ENTER key to enter the
Parameter Setting Display.
5
Change the set value to 2 using the Increment
key.
6
Press the DATA/ENTER key. The COPY func-
tion will start.
7
If the COPY function is completed “End”
respectively “Copy Complete” is displayed on
the Digital Operator. Then the display returns to
the Monitor Display and parameter o1-03 is
automatically reset to 0.
** Main Menu **
-ADV-
Programming
Initialization
-ADV-
A1
- 00 = 1
Select Language
COPY Function
-ADV-
o3 - 01 = 0
Copy Funtion Sel
Copy Function Sel
-ADV-
o3-01= 0
COPY SELECT
*0*
Copy Function Sel
-ADV-
o3-01= 2
OP INV WRITE
*0*
COPY
-ADV-
OP INV
COPYING
COPY
-ADV-
COPY COMPLETE
Copy Function Sel
-ADV-
o3
-
01 =0
COPY SELECT
*0*

Omron Varispeed E7 Specifications

General

Brand	Omron
Model	Varispeed E7
Category	Inverter
Language	English