121
ZX-E
Operation Manual
Section 6 Measuring with Multiple Amplifier Units
Section 6
AUXILIARY FUNCTIONS
Settings for mutual interference prevention are made on the CH1 Amplifier Unit.
Moving to FUN and SPCL
1. Set the mode switch to FUN on the CH1
Amplifier Unit.
2. Use the LEFT and RIGHT Keys to display
SPCL on the main display.
Moving to SYNC
3. Press the UP or DOWN Key.
The sub-display will flash.
4. Use the UP and DOWN Keys to display ETC
or ALL.
5. Press the ENT Key.
6. Use the LEFT and RIGHT Keys to display
SYNC on the main display.
7. Press the UP or DOWN Key.
The sub-display will flash.
8. Use the UP and DOWN Keys to display ON.
9. Press the ENT Key to confirm the settings.
Settings for mutual interference prevention can now be
made.
Z166-E1-02A.book Page 121 Friday, June 3, 2005 4:18 PM
To Next Page
Loading...
