Omron ZX-E - Page 160

158
Appendices
Quick Reference for Displays
ZX-E
Operation Manual
APPENDICES
D D000 Linearity adjustment value input at 0% of measurement distance position p. 56
D050 Linearity adjustment value input at 50% of measurement distance position p. 56
D100 Linearity adjustment value input at 100% of measurement distance posi-
tion
p. 56
(*) D-FWD Display direction for measured values when scaling function used (display
not inverted)
p. 90
(*) D-INV Display direction for measured values when scaling function used (display
inverted)
p. 90
DIGIT Number of digits setting for main and sub-displays p. 123
(*) DOWN Hold/Trigger mode/Self-down trigger p. 83
DREV Reverses position of main and sub-displays. p. 124
(*) DISP Displays display-related functions from special menu. p. 51
E ECO Reduces power consumption by reducing main and sub-display lighting. p. 126
(*) ETC Displays functions other than display- and output-related functions from
special menu.
p. 51
F (*) FE Linearity adjustment/Sensing object material/Iron, Stainless steel
(SUS410)
p. 54
FOCUS Measured value output range setting p. 103
H H-DLY Hold/Delay hold p. 86
H-D-T Hold/Delay hold/Delay time setting p. 86
H-HYS Hold/Trigger mode/Self-trigger hysteresis width setting p. 83
H-LVL Hold/Trigger mode/Self-trigger level setting p. 83
H-S-T Hold/Delay hold/Sampling period setting p. 86
H-TRG Hold/Trigger mode setting p. 83
HOLD Hold setting p. 81
HYS Hysteresis width setting p. 102
I INIT Initialization of settings p. 135
K (*) KEEP Non-measurement settings/Hold output p. 110
L L-ADJ Linear output offset value setting p. 107
LINER Linearity adjustment p. 54
LINIT Initialization of linearity adjustment data p. 59
M (*) MAX Non-measurement settings/Clamp value/Maximum p. 110
METAL Linearity adjustment/Sensing object material p. 54
O (*) OFF-D Timer/Off-delay p. 112
(*) ON-D Timer/On-delay p. 112
Display Details Pages
Z166-E1-02A.book Page 158 Friday, June 3, 2005 4:18 PM