Back Up the Current Oracle ILOM Firmware Configuration (Oracle Hardware Management Pack)
Backing Up and Restoring Hardware and Firmware Configurations 105
Related Information
■
Updating the UEFI BIOS (ubiosconfig), Oracle Server CLI Tools User's Guide at http://
www.oracle.com/goto/ohmp/docs
Back Up the Current Oracle ILOM Firmware
Configuration (Oracle Hardware Management
Pack)
1.
Access the operating system command-line interface.
For more information, see “Accessing Oracle Hardware Management Pack” on page 31.
2.
Use the ilomconfig export command:
ilomconfig export config --xmlfile=filename.xml
A prompt appears asking whether you want to specify a passphrase. The passphrase is used to
encrypt sensitive data in the backup file. If you specify a passphrase, the passphrase is required
to restore the backed up configuration. If you do not specify a passphrase, sensitive data will not
be included in the backup file.
3.
If you choose to encrypt sensitive data in the file, type y, and then specify a
passphrase.
4.
If you choose not to include sensitive data in the backup file, type n.
Related Information
■
Configuring Oracle ILOM (ilomconfig), Oracle Server CLI Tools User's Guide at http://
www.oracle.com/goto/ohmp/docs
Restoring Saved Firmware Configurations
To recover from unwanted configuration changes, you can revert the server BIOS, Oracle
ILOM firmware, or RAID settings to a saved configuration. To load a configuration from a
previously exported XML file, see the following procedures.
■
“Restore a Saved BIOS Firmware Configuration (Oracle ILOM)” on page 106
■
“Restore a Saved Oracle ILOM Firmware Configuration (Oracle ILOM)” on page 107
■
“Restore a Saved BIOS Firmware Configuration (Oracle Hardware Management
Pack)” on page 109
To Next Page
Loading...
Need help?
General
