Oracle X6 series User Manual

Modifying the Boot Order
48 Oracle X6 Series Servers Administration Guide • April 2016
The UEFI/BIOS Boot Mode dialog box appears.
4.
Select Legacy or UEFI.
Note - Before you can configure the boot order list, you must reset the server and reenter the
BIOS Setup Utility. After you reset the server, the boot order list is populated with the devices
that support the chosen boot mode.
5.
Press the F10 function key to save your changes and exit the BIOS Setup Utility.
Modifying the Boot Order
The boot order list determines which device the server boots from. You can make persisting
changes to the boot order list in the BIOS Setup Utility, or you can specify a boot device that is
only valid for one subsequent server boot in Oracle ILOM.

Oracle X6 series Specifications

General

Cores per Processor	Up to 22 cores
Processor	Intel Xeon E5-2600 v4 series
Networking	10GbE
Form Factor	Rackmount
Expansion Slots	PCIe slots available
Power Supply	Redundant power supplies
Storage	supports SAS, SATA, and NVMe drives