Oracle X6 series User Manual

Restore a Saved BIOS Firmware Configuration (Oracle Hardware Management Pack)
Backing Up and Restoring Hardware and Firmware Configurations 109
Restore a Saved BIOS Firmware Configuration
(Oracle Hardware Management Pack)
1.
Access the operating system command-line interface.
For more information, see “Accessing Oracle Hardware Management Pack” on page 31.
2.
Use the ubiosconfig import command:
ubiosconfig import all --xmlfile=filename.xml
Related Information
■
Updating the UEFI BIOS (ubiosconfig), Oracle Server CLI Tools User's Guide at http://
www.oracle.com/goto/ohmp/docs
Restore a Saved Oracle ILOM Firmware
Configuration (Oracle Hardware Management
Pack)
1.
Access the operating system command-line interface.
For more information, see “Accessing Oracle Hardware Management Pack” on page 31.
2.
Use the ilomconfig import command:
ilomconfig import config --xmlfile=filename.xml
A prompt appears asking you to confirm that you want to import the settings from the XML file
you specified.
3.
Type y to confirm that you want to proceed.
A second prompt appears asking whether you want to specify a passphrase. If a passphrase
was used to encrypt sensitive data in the backup file, the passphrase is required to restore the
sensitive data.
4.
If you included sensitive data in the XML file, and you want to restore the
sensitive information, enter the passphrase.
Related Information
■
Configuring Oracle ILOM (ilomconfig), Oracle Server CLI Tools User's Guide at http://
www.oracle.com/goto/ohmp/docs

Oracle X6 series Specifications

General

Cores per Processor	Up to 22 cores
Processor	Intel Xeon E5-2600 v4 series
Networking	10GbE
Form Factor	Rackmount
Expansion Slots	PCIe slots available
Power Supply	Redundant power supplies
Storage	supports SAS, SATA, and NVMe drives