Oracle X6 series User Manual

Monitor Server Power Consumption and Component Temperatures 89
Monitor Server Power Consumption and
Component Temperatures
This section describes how to monitor the amount of power the server consumes and the
temperature of the air entering and leaving the system.
Task Link
View current server power consumption and historical
power consumption data.
“Monitoring Server Power Consumption” on page 89
View server inlet and exhaust temperatures, or enable the
Enhanced PCIe Cooling Policy.
“Monitoring Server Inlet and Exhaust
Temperature” on page 92
Monitoring Server Power Consumption
Oracle ILOM provides the following power metrics for the server:
■
Power Supply Maximum: The maximum amount of power the power supply units (PSU)
can draw.
■
Allocated Power: The power allocated for installed and hot-pluggable components.
■
Actual Power: The amount of power the server is currently consuming.
■
Peak Permitted: The maximum power the server can consume at any time.
In addition, you can view historical power consumption data from the Oracle ILOM web
interface.
To view server power metrics, see the following procedures:
■
“View Current Server Power Consumption (Oracle ILOM)” on page 90
■
“View Power Allocated to Server Components (Oracle ILOM)” on page 90
■
“View Historical Power Consumption Data (Oracle ILOM)” on page 91

Oracle X6 series Specifications

General

Cores per Processor	Up to 22 cores
Processor	Intel Xeon E5-2600 v4 series
Networking	10GbE
Form Factor	Rackmount
Expansion Slots	PCIe slots available
Power Supply	Redundant power supplies
Storage	supports SAS, SATA, and NVMe drives