Monitoring Hardware Faults
Monitoring Server Inventory and Health 83
Tool Description Documentation
■ Use the following command to start the diagnostics:
start /HOST/diag
Monitoring Hardware Faults
Oracle's server management tools enable you to proactively monitor the health of your system
and can be configured to notify you when hardware faults occur. The following procedures
describe how to view a list of problems diagnosed on the system and view log information to
help troubleshoot the issue:
■
“View and Resolve Open Problems (Oracle ILOM)” on page 83
■
“View and Resolve Open Problems (Oracle Hardware Management Pack)” on page 84
■
“View the Event Log (Oracle ILOM)” on page 85
View and Resolve Open Problems (Oracle ILOM)
1.
To view open problems on the server from the Oracle ILOM web interface:
a.
Log in to the Oracle ILOM web interface.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
In the navigation pane, click Open Problems.
A list of faults diagnosed on the server appears. Each entry includes a link to an Oracle
Knowledge Article, which describes a corrective action.
2.
To view open problems on the server from the Oracle ILOM command-line
interface (CLI):
a.
Log in the the Oracle ILOM CLI.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
Use the show /System/Open_Problems command.
A list of faults diagnosed on the server appears, for example:
Open Problems (7)
Date/Time Subsystems Component
------------------------ ------------------ ------------
Wed Apr 2 20:03:19 2014 System MB (Motherboard)
fault.io.pciex.bus-linkbw-down (Probability:50,
To Next Page
Loading...
Need help?
General
