Oracle X6 series - Assign System Identification Information (Oracle ILOM); Assign System Identification Information

Assign System Identification Information (Oracle ILOM)
64 Oracle X6 Series Servers Administration Guide • April 2016
Assign System Identification Information (Oracle
ILOM)
Before you begin, ensure that you have Admin (a) role privileges in Oracle ILOM.
1.
To assign system identification information from the Oracle ILOM web interface,
perform the following steps:
a.
Log in to the Oracle ILOM web interface.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
In the navigation pane, click ILOM Administration > Identification.
c.
Specify one or more of the following system identifiers:
■
SP Hostname
■
SP System Identifier
■
SP System Contact
■
SP System Location
d.
Click Save.
2.
To assign system identification information from the Oracle ILOM command-line
interface (CLI), perform the following steps:
a.
Log in to the Oracle ILOM CLI.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
Use the set command:
set /SP [hostname=hostname] [system_identifier=id] [system_contact=name]
[system_location=building_floor_lab]
You have the option of setting one or more identifiers.
Related Information
■
Setting Identification Labels for a Managed Device, Oracle ILOM Getting Started Guide,
Firmware Release 3.2.x at http://www.oracle.com/goto/ilom/docs