Oracle X6 series User Manual

Assign System Identification Information (Oracle Hardware Management Pack)
Configure the Service Processor 65
Assign System Identification Information (Oracle
Hardware Management Pack)
1.
Access the operating system command-line interface.
For more information, see “Accessing Oracle Hardware Management Pack” on page 31.
2.
Use the ilomconfig modify command:
ilomconfig modify identification [--hostname=hostname] [--system-contact=system_contact]
[--system-location=system_location] [--system-identifier=system_identifier]
You have the option of setting one or more identifiers.
Related Information
■
Configuring Oracle ILOM (ilomconfig), Oracle Server CLI Tools User's Guide at http://
www.oracle.com/goto/ohmp/docs
Modifying Service Processor Network Settings
The server has two connections to the network: a host connection and a management
connection.
■
The host connection accesses the Internet from the server operating system.
■
The management connection accesses Oracle ILOM remotely.
The service processor (SP) management connection is configured when the system is shipped;
however you can modify the settings using the following optional procedures:
■
“Modify Oracle ILOM SP Network Settings (Oracle ILOM)” on page 65
■
“Modify Service Processor Network Settings (Oracle Hardware Management
Pack)” on page 67
■
“Modify Service Processor Network Settings (BIOS)” on page 68
Modify Oracle ILOM SP Network Settings (Oracle
ILOM)
When you use Oracle ILOM to deploy or manage the server, you can optionally modify the
default network settings provided for the service processor (SP).

Oracle X6 series Specifications

General

Cores per Processor	Up to 22 cores
Processor	Intel Xeon E5-2600 v4 series
Networking	10GbE
Form Factor	Rackmount
Expansion Slots	PCIe slots available
Power Supply	Redundant power supplies
Storage	supports SAS, SATA, and NVMe drives