Oracle X6 series User Manual

Configure DNS Server Information on the Service Processor (Oracle Hardware Management Pack)
76 Oracle X6 Series Servers Administration Guide • April 2016
Related Information
■
Modifying Default Connectivity Configuration Properties, Oracle ILOM Administrator's
Guide for Configuration and Maintenance, Firmware Release 3.2.x at http://www.oracle.
com/goto/ilom/docs
Configure DNS Server Information on the Service
Processor (Oracle Hardware Management Pack)
1.
Access the operating system command-line.
For more information, see “Accessing Oracle Hardware Management Pack” on page 31.
2.
To enable Oracle ILOM to automatically retrieve DNS information from a DHCP
server on the network, use the following command:
ilomconfig modify dns --autodns enabled --retries retries --timeout timeout
Where timeout is an integer between 1 and 10, and retries is an integer between 0 and 4.
3.
If you prefer to disable autodns, use the following command:
ilomconfig modify dns --nameservers nameserverlist --autodns disabled --retries retries --
searchpath searchpathlist --timeout timeout
Related Information
■
Configuring Oracle ILOM (ilomconfig), Oracle Server CLI Tools User's Guide at: http://
www.oracle.com/goto/ohmp/docs

Oracle X6 series Specifications

General

Cores per Processor	Up to 22 cores
Processor	Intel Xeon E5-2600 v4 series
Networking	10GbE
Form Factor	Rackmount
Expansion Slots	PCIe slots available
Power Supply	Redundant power supplies
Storage	supports SAS, SATA, and NVMe drives