Oracle X6 series User Manual

Add an Oracle ILOM User Account (Oracle ILOM)
Configure the Service Processor 71
Creating a local Oracle ILOM user account involves assigning a user name and password and
assigning one or more user roles. For more details, see the following procedures:
■
“Add an Oracle ILOM User Account (Oracle ILOM)” on page 71
■
“Add an Oracle ILOM User Account (Oracle Hardware Management Pack)” on page 72
Add an Oracle ILOM User Account (Oracle ILOM)
Before you begin, ensure that you have User Management (u) role privileges in Oracle ILOM.
1.
To create an Oracle ILOM user account using the Oracle ILOM web interface,
perform the following steps:
a.
Log in to the Oracle ILOM web interface.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
In the navigation pane, click ILOM Administration > User Management, and
then click the User Accounts tab.
c.
In the Users table, click Add.
The User Account dialog box appears.
d.
Specify a User Name, Password, and User Role.
e.
Click Save.
2.
To create an Oracle ILOM user account using the Oracle ILOM command-line
interface (CLI), perform the following steps:
a.
Log in to the Oracle ILOM CLI.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
Use the set command:
set /SP/users/username password=password [role=a|u|c|r|o|s|Operator|Administrator]
Related Information
■
Managing User Credentials and Managing Password Policy Restrictions for Local Users
Oracle ILOM Administrator's Guide for Configuration and Maintenance, Firmware Release
3.2.x at http://www.oracle.com/goto/ilom/docs
■
Add New Users to Oracle ILOM, Oracle ILOM Quick Start Guide, Firmware Release 3.2.x
at http://www.oracle.com/goto/ilom/docs

Oracle X6 series Specifications

General

Cores per Processor	Up to 22 cores
Processor	Intel Xeon E5-2600 v4 series
Networking	10GbE
Form Factor	Rackmount
Expansion Slots	PCIe slots available
Power Supply	Redundant power supplies
Storage	supports SAS, SATA, and NVMe drives