Oracle X6 series User Manual

Set Enhanced PCIe Cooling Policy (Oracle ILOM)
Monitor Server Power Consumption and Component Temperatures 93
a.
Log in to the Oracle ILOM web interface.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
In the navigation pane, click System Management > Policy.
The Policy Configuration page appears.
c.
In the Service Processor Policies table, select Set Enhanced PCIe Cooling
Mode Policy.
d.
Select Enable or Disable in the Actions drop-down list.
The policy takes effect at the next server reset.
2.
To set the Enhanced PCIe Cooling Policy in the Oracle ILOM command-line
interface:
a.
Log in to the Oracle ILOM CLI.
For instructions, see “Accessing Oracle ILOM” on page 21.
b.
Use the set /SP/policy ENHANCED_PCIE_COOLING_MODE=enabled|disabled command.
The policy takes effect at the next server reset.
Related Information
■
Power On and Cooling Down Policies Configurable from SP, Oracle ILOM Administrator's
Guide for Configuration and Maintenance, Firmware Release 3.2.x at: http://www.
oracle.com/goto/ilom/docs

Oracle X6 series Specifications

General

Cores per Processor	Up to 22 cores
Processor	Intel Xeon E5-2600 v4 series
Networking	10GbE
Form Factor	Rackmount
Expansion Slots	PCIe slots available
Power Supply	Redundant power supplies
Storage	supports SAS, SATA, and NVMe drives