Oracle X7-2 - Reset the Server Using Oracle ILOM

Reset the Server Using Oracle ILOM
Reset the Server Using Oracle ILOM
1.
Log in to the Oracle ILOM web interface or command-line interface (CLI) using an
account with admin (a) role privileges.
2.
To reset the server:
■ From the web interface:
a.
In the left pane, click Host Management → Power Control, and select
Reset from the Select Action list box.
b.
Click Save and click OK to reset the server.
■ From the CLI:
a.
Type the following command:
-> reset /System
b.
When prompted, type y to confirm:
Are you sure you want to reset /System (y/n)? y
Performing hard reset on /System
Controlling System Power 123