Oracle X7-2 - Log in to Oracle ILOM Using a Local Serial Connection

Log In to Oracle ILOM Using a Local Serial Connection
■
“Log In to Oracle ILOM Using a Local Serial Connection” on page 85
■
“Log In to Oracle ILOM Using a Remote Ethernet Connection” on page 86
To log out of Oracle ILOM, follow this procedure:
■
“Exit Oracle ILOM” on page 88
Log In to Oracle ILOM Using a Local Serial
Connection
Note - To enable first time login and access to Oracle ILOM, a default Administrator account
and its password are provided with the system. To build a secure environment, change the
default password (changeme) for the default Administrator account (root) after your initial
login.
If this default Administrator account has since been changed, contact your system administrator
for an Oracle ILOM user account with Administrator privileges.
For information about how to change the root password, refer to the Oracle Integrated Light Out
Manager (ILOM) Documentation library at: http://www.oracle.com/goto/ilom/docs
Note - To prevent unauthorized access to Oracle ILOM, create user accounts for each user. For
details, refer to the Oracle Integrated Lights Out Manager (ILOM) Documentation Library at
http://www.oracle.com/goto/ilom/docs.
1.
Ensure that the server is cabled for a local serial connection to Oracle ILOM.
See “Connecting Cables and Applying Power” on page 71.
2.
Press Enter on the terminal device that is connected to the server.
3.
At the Oracle ILOM login prompt, type your user name, and press Enter.
4.
At the password prompt, type the password associated with your user name,
and press Enter.
Oracle ILOM displays a default command prompt (->), indicating that you successfully logged
in.
Related Information
■
“Connecting Cables and Applying Power” on page 71
Using Oracle ILOM 85