Oracle X7-2 - X7-2 Back Panel Connectors and Ports

X7-2 Back Panel Connectors and Ports
■
Ethernet ports:
■ ■
The Ethernet ports, labeled NET 0, NET 1, and NET 2, connect the server to the
network.
■
The Ethernet interfaces operate at 100 Mbps, 1000 Mbps, and 10,000 Mbps.
■
USB Ports: You can connect and disconnect USB cables and peripheral devices while the
server is running without affecting server operations.
■
AC power cables: Two power supply connectors, one for each power supply.
X7-2 Back Panel Connectors and Ports
The following figure shows the locations of cable connectors and ports on the back of the
Oracle Server X7-2 and the cables and devices that you connect to them.
No. Cable Port or Expansion Slot Description
1 Power supply 0 input power
Power supply 1 input power
The server has two power supply connectors,
one for each power supply.
Do not attach power cables to the power
supplies until you finish connecting the data
cables to the server. The server goes into
72 Oracle Servers X7-2 and X7-2L Installation Guide • October 2017