Oracle X7-2 Installation Guide

Install the Cable Management Arm (Optional)
the server into the rack until the slide-rail locks (on the front of the mounting
brackets) engage the slide-rail assemblies with an audible click.
Caution - Before you install the optional cable management arm verify that the server is
securely mounted in the rack and that the slide-rail locks are engaged with the mounting
brackets.
Related Information
■
“Install the Cable Management Arm (Optional)” on page 54
Install the Cable Management Arm (Optional)
Follow this procedure to install the cable management arm (CMA), which you can use to
manage cables connected to the back of the server.
54 Oracle Servers X7-2 and X7-2L Installation Guide • October 2017

Oracle X7-2 Specifications

General

Processor	Intel Xeon Scalable processors
Number of Processors	1 or 2
Memory	Up to 1.5 TB DDR4
Memory Slots	24 DIMM slots
Form Factor	2U Rackmount
Storage Bays	8 x 2.5-inch
CPU Socket	Socket P (LGA 3647)
Power Supply	Redundant hot-swappable power supplies