Oracle X7-2 - Reset the Service Processor from the Server Back Panel

Reset the Service Processor From the Server Back Panel
■ From the Oracle ILOM web interface, click Administration → Maintenance →
Reset SP.
Note - Resetting the Oracle ILOM SP disconnects your current Oracle ILOM session. You must
log in again to resume working in Oracle ILOM.
Reset the Service Processor From the Server
Back Panel
If the Oracle ILOM SP is hung and you cannot reset it using the Oracle ILOM web interface or
the Oracle ILOM CLI command, use the following procedure to reset the SP from the server
back panel.
1.
Using a stylus, press the Reset SP pinhole button located on the server back
panel.
132 Oracle Servers X7-2 and X7-2L Installation Guide • October 2017