Oracle X7-2 Installation Guide

Attach the Slide-Rails
2.
Starting with either the left or right side of the rack, align the back of the
slide-rail assembly against the inside of the back rack rail, and push until the
assembly locks into place with an audible click.
3.
Align the front of the slide-rail assembly against the outside of the front rack rail,
and push until the assembly locks into place with an audible click.
4.
Repeat Step 1 through Step 3 to attach the slide-rail assembly to the other side
of the rack.
Related Information
■
“Install Mounting Brackets on the Server” on page 44
Installing the Server Into a Rack 51

Oracle X7-2 Specifications

General

Processor	Intel Xeon Scalable processors
Number of Processors	1 or 2
Memory	Up to 1.5 TB DDR4
Memory Slots	24 DIMM slots
Form Factor	2U Rackmount
Storage Bays	8 x 2.5-inch
CPU Socket	Socket P (LGA 3647)
Power Supply	Redundant hot-swappable power supplies