range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn 138 www.xunlong.tv
of images, such as pre-installing additional software packages and modifying
configuration files
j. Then make an image file and format the partition, the default type is ext4
k. Then copy the configured rootfs to the image partition
l. Then update the initramfs
m. Finally, write the bin file of u-boot to the image through the dd command
9) After compiling the image, the following information will be prompted
a. The storage path of the compiled linux image
[ o.k. ] Done building
[ output/images/Orangepipcplus_2.1.0_ubuntu_bionic_server_linux5.4.65/Orangepi
pcplus_2.1.0_ubuntu_bionic_server_linux5.4.65.img ]
b. The time used to compile the image
[ o.k. ] Runtime [ 9 min ]
c. Repeat the command to compile the image, use the following command without
selecting through the graphical interface, you can directly start to compile the
image
[ o.k. ] Repeat Build Options [ sudo ./build.sh BOARD=orangepipcplus
BRANCH=current BUILD_OPT=image RELEASE=bionic BUILD_MINIMAL=no
BUILD_DESKTOP=no KERNEL_CONFIGURE=yes ]
To Next Page
Loading...
