range Pi 用户手册 深圳市迅龙软件有限公司版权所有
www.orangepi.cn 94 www.xunlong.tv
6) You can also map the output of tty1 to the fb device of the LCD screen-fb8. After the
mapping is completed, HDMI will no longer have image output.
root@orangepi:~# con2fbmap 1 8
If you want to switch back to HDMI display, please use the following command
root@orangepi:~# con2fbmap 1 0
Below is the output of running the htop command
To Next Page
Loading...
