SECTION 1: INTRODUCTION AND EQUIPMENT DESCRIPTION
3 REI OSC-5000E
1. Power/Mode – turns on the unit and toggles the Auto and Manual Modes.
2. Program Key – removable chip allows easy software upgrades.
3. Graphic LCD Display – Backlit display, 128 x 256 pixel, contrast-controllable.
4. Alarm Control - Used in Automatic Mode to alarm on detected threats.
5. Plotter Control - Prints current screen to printer
6. Audio Monitor - FILTER selects voice band filter (300 - 3000 Hz) to reduce monitored
noise. EXT allows listening to external sound source.
7. Audio Analysis - CORR activates acoustic correlator for audio pattern matching.
SPECT displays real time audio wave shapes for analysis.
8. Store/Recall - stores signal data, and RF spectrum window data.
9. Rotary Dial - allows precise frequency selection and selection of some menu items.
10. Expand/Narrow - expands or narrows displayed frequency span.
11. Sweep/Analyze - allows instant jump between receiver’s spectrum graphic display
and demodulated signal analysis.
12. Seek/Limits - seeks to next signal.
13. Down/Up - changes screen to a higher or lower frequency span, or tunes sub-carrier
demodulator.
14. Power Input - IEC-320 international power cord compatible, 115/230 VAC (switch
selectable), 50/60 Hz or external 12-18 VDC input.
15. Control/RF Cables - connects main unit and antenna array. VLF/MF provides input
for 10 kHz to 5 MHz; HF/UHF provides input for 5 MHz to 3 GHz.
16. Video Output - provides standard video signal for monitors.
17. Serial Communications - USB Computer Interface for use with OPC software.
18. Expansion Module Port - supports OTL (OSCOR Triangulate and Locate option) and
the OSCOR Microwave Downconverter MDC-2100.
19. OEP-2100 – Included with and required for the operation of the Microwave
Downconverter MDC-2100
20. Recorder Output - provides line level audio for recording.
21. OIF – Intermediate Frequency Output provides an IF output of 10.7 MHz for detailed
signal analysis
22. External Speaker - Auxiliary speaker output. Rated for 8 ohms, 3 watts.
23. Reference Microphone - Provides room audio input for correlate function. EXT REF
input jack allows external audio input.
24. Volume/Squelch - controls audio volume and squelch level of received signals.
25. Internal Speaker - 3" x 5" optimized for voice band reception
26. Printer Access – access to 2-inch thermal paper for printer.
Features not shown:
Rechargeable built-in battery - provides 2-5 hours operation per charge. Built-in
automatic recharging system.
Audio Automatic Gain Control - continuously adjusts audio to optimum levels.
To Next Page
Loading...