SECTION 7: SUMMARY OF OSCOR SPECIFICATIONS
107 REI OSC-5000E
SECTION 7: SUMMARY OF OSCOR
SPECIFICATIONS
RF System:
RF Receiver Type: Quad Conversion Super
Heterodyne with 3 phase locked loop
synthesizers
RF Frequency Coverage: 10kHz-3GHz
Tuning Resolution: 100Hz
Sensitivity: 0.8µV typical with 15kHz
Bandwidth (+15dBm MAX)
Demodulators: AM, FM Wide, FM Narrow.
FM SC, SSB/CW
IF Bandwidth: 250kHz, 15kHz, 6kHz
Attenuators: 0, -20dB at active whip,
Discone, and VLF-MF input
Dynamic Range: 90dB
Sub-carrier Tuning Range: 15kHz-250kHz
Antenna Types: Balanced Loop 10kHz-
500kHz (35-45kHz Narrow)
Active Whip: 500kHz-1500MHz
Discone: 1500MHz-3000MHz
Infrared Detector: 10kHz-5MHz, 850-
1070nM
AC Carrier Current: 10kHz-5MHz
(Balanced Across Power Line)
Control System:
8/16 Bit Microcontroller
512K Static RAM Memory
Optical Encoder: 128 Pulse/Rev with
variable count ratio
Program Key: 64K Byte ROM
Display: 128 x 256 Segment Graphics
Supertwist LCD
Printer: 192 Dot Per Line Graphics on 2"
wide thermal paper
Audio System:
Frequency Response: 50Hz-15kHz
Voiceband Filter: 300Hz-3000Hz -
18dB/Octave
AGC Dynamic Range: 60dB
Output Power: 3W @ 4Ω
Headphone Output: 0-2V rms @ 220Ω
Record Output: 50mV rms (with AGC) @
500Ω
Remote contact: Normally Open (200mA
32V MAX)
Balanced Auxiliary Input: 0.5V rms Nominal
@ 600Ω
Reference Audio Input: 1mV - 1V rms @
3.9KΩ
Sonic Correlator: 50Hz - 15kHz (Frequency
Independent)
Audio Alarm: 3 Level Programmable Two
Tone Ringer
Squelch: Automatic digital or manual
control over full display range
Headphones: Low acoustic leakage, 16Ω
output limited to 105dBA
Power System:
AC Input: 105-130/210-260VAC, 50-
60Hz, 24W
External DC Input: 12-l8VDC, 1A max
Internal Battery: 12V 2.9Ah 3-hour
operation per charge typical
Mechanical:
Size (HxWxD): 6.25 x 18.5 x 14.5 in (47 x
36.8 x 15.9 cm)
Weight: 28 lb. (12.7kg)
To Next Page
Loading...