Figure 6. Shock Absorber And Air Spring.
2. Check air spring assemblies for leakage.
CONDITION/INDICATION
Are axles No. 2, 3, and 4 air spring assemblies or shock absorbers loose or damaged?
DECISION
No - Test 8 - Does HET tractor wander, pull to one side, lean, or shimmy?
Yes - Contact supervisor.
TEST 8 - Does HET tractor wander, pull to one side, lean, or shimmy?
1. Ensure vehicle is returned to operating condition.
2. Start engine. (WP 0037)
3. Drive HET tractor at speed where the problem was initially encountered.
4. Bring HET tractor to a full stop.
CONDITION/INDICATION
Does HET tractor wander, pull to one side, lean, or shimmy?
DECISION
No - Problem corrected.
Yes - Contact supervisor.
END OF WORK PACKAGE
TM 9-2320-360-10 0084
0084-6
To Next Page
Loading...
