USER'S MANUAL
General instructions for use
I-Max Touch (110-120V) (Rev. 0)
70
NOTE:
If, during the exposure, the patient moves, or the machine collides with
the patient himself (or with any object), or you realise that the
parameters set are not correct, you must release the X-ray button
immediately, interrupting the emission of X-rays and the movement of
the arm.
If this occurs, the following message will be displayed:
E 2 0 6
P R E S S > 0 <
All the motors will switch off, and it will be possible, if necessary, to
manually rotate the arm, allowing the patient to come out; it is
recommended that this movement be made with great care in order
to prevent damage to the machine.
Then press the "Patient Entrance" (6) key and the display
will show:
M A C H I N E S E T T I N G
P R E S S > 0 <
and then:
WA I T F O R
M A C H I N E S E T T I N G
The system now returns to its initial position and the patient must be
repositioned.
NOTE:
If the open mouth exposure is not completed, the closed mouth exposure
must be repeated or the four complete pictures will not appear.
*
*
To Next Page
Loading...
