Pakedge MS Series User Manual

MS Series User Guide
24
Switchport Configuration
To access the VLAN switchport configuration, go to Interfaces > VLAN > Switchport
Configuration.
The second VLAN sub-tab is Switchport Configuration.
From the Switchport Configuration sub-tab, assign switchport settings per port. Select
Switchport Mode Access or Trunk.
Edit Switchport Configuration
To edit Switchport Configuration:
1. Select Interfaces > VLAN > Switchport Configuration.
2. Click the More ( ) icon, then click Edit.
3. Select the check box next to items you want to edit, then click Edit Selected.
Caution! Before making changes, make sure the correct ports are selected.
4. Complete the dialog.
5. Click Save, then click Apply to save your changes.

Pakedge MS Series Specifications

General

Brand	Pakedge
Model	MS Series
Category	Switch
Language	English