Pakedge MS Series User Manual

MS Series User Guide
28
Port Configuration
To access PoE port configurations, go to Interfaces > PoE > Port Configuration .
The first PoE sub-tab is Port Configuration.
From the Port Configuration sub-tab, view/edit current port settings.
See below for an explanation of each setting.
Port Configuration settings
Setting
Function
Enable
Indicates whether PoE is enabled/disabled on the interface.
Interface
Interface associated with the data in the row.
Name
Name associated with the Interface on the row.
Priority
Priority of the port when allocating available power.
Power Mode
When enabled, the port supports the PoE+ power standard, which allows
for providing up to 30W of power.
Power Limit Type
Type of power limiting used for the port.
Power Limit (mWatts)
Specifies power limit for the port.
Displays only when
Power Limit Type
is set to
User
.

Pakedge MS Series Specifications

General

Brand	Pakedge
Model	MS Series
Category	Switch
Language	English