Pakedge MS Series User Manual

MS Series User Guide
21
Unicast Storm
Recovery Level
When editing, specify the unicast storm control threshold for
the port. Unicast storm control limits the number of unicast
frames accepted and forwarded by the switch.
• Enable/Disable, then select a percentage or PPS.
• Select None/Shutdown/Trap.
Edit port names
You can edit the display name for each port on this page. Port names help distinguish one
port from another (for example, Touch Screen, Camera, Controller).
To edit port names:
1. Log in to the switch.
2. Click Interfaces > Port > Port Details.
3. Click the More ( ) icon and click Edit.
4. Select the check box next to items you want to edit, then click Edit Selected.
Caution! When editing multiple ports, make sure the correct ports are selected before
making changes.
5. Enter the port’s new name.
6. Click Save, then click Apply to save your changes.
Port Details
To access Port Details, go to Interfaces > Ports > Port Details .
Under Port Details, edit each port’s name or view port information such as Physical Address,
Port List Bit Offset, and Interface Index.

Pakedge MS Series Specifications

General

Brand	Pakedge
Model	MS Series
Category	Switch
Language	English