Pakedge MS Series User Manual

MS Series User Guide
26
Tagged
VLANs
The VLAN ID(s) allowed to communicate on this port using
802.1q tagging as well as Untagged. The Native VLAN (PVID)
should always be included in this setting along with Tagged
VLANs that are to be allowed on the port.
1
Priority
Default 802.1p priority assigned to untagged packets arriving
at the interface.
0
VLAN Subpage: Reset
To access the VLAN reset feature, go to Interfaces > VLAN > Reset.
From the Reset sub-tab, click the Reset button to return the VLAN configuration parameters
to their default values.
1. Go to Interfaces > VLAN > Reset to reset VLAN configurations.
2. Click Save to reset all VLAN configuration parameters to their default values.

Pakedge MS Series Specifications

General

Brand	Pakedge
Model	MS Series
Category	Switch
Language	English