RT-3100 5-Port Single-WAN Gigabit Router User Guide
Reset to factory default settings
While setting up or troubleshooting, you may need to reboot the router or restore it to its
factory default settings.
Caution: Do not power off the router during a factory reset.
Reset using the interface
To only restart the router, maintaining all settings:
1. In the Overview or Connections tab, click Restart Device. The router restarts.
To reset to factory default settings, deleting all user settings:
Caution: Performing this reset will delete all of your settings on the router.
1. Go to the Advanced tab and click Device Settings.
2. Click Factory Default, then click Yes.
Reset using the physical RESET button
Your router has a recessed RESET button accessible through a pinhole next to the Ethernet
port underneath the router.
To only reboot the router, maintaining all settings:
1.
While power is connected, insert a narrow, pointed object (such as a straightened paper
clip) into the hole.
2.
Press and release the button.
To reset to factory default settings, deleting all user settings:
Caution: Performing this reset will delete all of your settings on the router.
1.
While power is connected, insert a narrow, pointed object (such as a straightened paper
clip) into the hole.
2.
Press and hold the button for at least ten seconds, then release it.
25
To Next Page
Loading...
