RT-3100 5-Port Single-WAN Gigabit Router User Guide
Advanced
The Advanced tab lets you configure Advanced settings for VPN, Firewalls, BakPak (remote
management), and more.
See below for a summary of each feature on the Advanced tab (detailed instructions follow).
Feature Functional summary
BakPak
Register the router to access it from the BakPak cloud management
platform.
Device
Settings
Configure basic router functionality.
DHCP
Reservation
Manually assign an IP address to a client device using DHCP.
Dual WAN
Enable a secondary WAN connection for redundant access to the
internet or to connect to a secondary network.
Dynamic
DNS
Configure a continually updated, user-configured domain name that
provides remote access even when the public IP address changes.
Firewall
Control the forwarding of traffic between network interfaces and
access fine-grain control over firewall rules.
Firmware
Update the router firmware for functionality improvements and
feature enhancements.
Multicast
Routing
Allow the routing of multicast traffic between LAN and VLAN
interfaces on the router.
NAT
(Port
Forwarding)
Define Network Address Translation rules for incoming traffic. Also
referred to as Port Forwarding, 1:1NAT, Virtual Server, or Port Mapping.
Parental
Controls
Configure rules to limit access to specific websites or restrict internet
access to a device based on a schedule.
QoS
Configure Quality of Service settings to prioritize and limit traffic
speeds through the router.
Static
Routes
Manually configure routing rules to control the path of traffic when
trying to reach a specified network.
VLAN Port
Settings
Configure individual port access to VLANs.
VPN
Configure a Virtual Private Network using OpenVPN or PPTP servers.
26
To Next Page
Loading...
