RT-3100 5-Port Single-WAN Gigabit Router User Guide
QoS
On the QoS tile, configure Quality of Service settings to prioritize and limit traffic speeds
through the router.
Quality of Service (QoS) allows you to prioritize data on the network. For example, there are
certain applications which require the least amount of latency possible (you might prioritize
your work computer over your children’s smart phones).
You can prioritize this type of traffic so that it is sent ahead of other data that can function
properly with some latency, such as ordinary web traffic.
Restrict WAN upload and download speeds
From the top of the page, you can restrict download and upload speeds. For example, in the
following image we have set 25 Mbps as the limit for download and 10 Mbps as the limit for
upload speeds. This setting will apply to all devices on the network.
To restrict upload and download speeds:
1. Go to the Advanced tab > QoS. Under WAN Throughput Control, click Enable.
2.
Here, you can restrict download and upload speeds.
For example, in the following image we have set 25 Mbps as the limit for
download and 10 Mbps as the limit for upload speeds. This setting will apply to
all devices on the network.
59
To Next Page
Loading...
