RT-3100 5-Port Single-WAN Gigabit Router User Guide
Easily run four types of tests:
l
Ping – Test communication between two devices on the network.
l
Traceroute – Show how many routers, or hops, there are between the router and a
certain destination.
l
NSLookup – Find name server information for domains.
l
SpeedTest – Check the Internet speed of the router. Important! Speed tests run from the
router can easily be affected by other network traffic and processor utilization on the
router. It is recommended for most accurate results to run speed tests from a PC wired to
the router.
To run a test:
1. Go to the Advanced tab > Device Settings, then under Diagnostic Tools > Type,
scroll to select the test you would like to run (ping, traceroute, nslookup, speedtest).
2.
Type the IP address or hostname you want to test and click li.
3.
After a few moments, your results will be displayed.
30
To Next Page
Loading...
