Pakedge RT-3100 - Page 46

RT-3100 5-Port Single-WAN Gigabit Router User Guide
Field Function Options
Enable
Enable or disable the current firewall
policy.
Toggle to enable/disable
Name
Assign a name to the current firewall
policy.
Type any name (up to 32
characters)
Protocol
Select the specific protocol to match to
the rule.
l Any
l TCP+UDP
l TCP
l UDP
l ICMP
l Custom (manual
entry)
From
Select the Firewall Zone which traffic
must have as its source to apply to this
rule.
l Any
l Choose from a list of
available firewall
Zones
To
Select the Firewall Zone which traffic
must be destined for to apply to this
rule.
Source
Select the IP address from which traffic
must originate from in order to apply to
this rule.
l Any
l Choose from a list of
all available IP
addresses
l Custom
Destination
Select the IP address which traffic must
be destined in order to apply to this
rule.
Service
Designate the port number to which
traffic must be destined for in order to
apply to this rule.
l All
l Enter a port number.
(Do NOT enter ports
in use by the router).
Action
Accept/Reject/Drop l Accept/Reject/Drop
46