RT-3100 5-Port Single-WAN Gigabit Router User Guide
Example: For our example we will be forwarding traffic destined for the unknown network
(192.168.222.0/24) to the IP address of the Gateway device which has knowledge of that
network (192.168.1.111).
Field Function Example
Target
IP
Address
Target IP Address will be the network which must
be accessed and is not directly known by the router.
192.168.222.0
Target
Subnet
Mask
Target Netmask is the Subnet Mask of that network.
255.255.255.0
Interface The Interface that Gateway traffic will be forwarded
to.
LAN
Gateway Gateway is the IP Address traffic should be
forwarded to in order to reach that new network. An
example of this would be the WAN IP address of a
second router connecting to the LAN of the router. In
order to reach the second routers LAN a static route
must be added to inform the router of the Gateway IP
that has direct knowledge of this new network.
192.168.1.111
Metric Metric can optionally be changed to indicate
precedence between two similar routes. If the higher
precedence route is not accessible, then the lower
metric route will be taken.
1
63
To Next Page
Loading...
