103
Settings for energy saving
Energy saving
9
Set the times.
z The time on the left is the control start time. The time on
the right is the control end time.
z Use to set the time. Hours can be set in the
range 0 to 23, and minutes may be either “00” or “30”.
9
10
Touch [Register].
z The “Term setting” dialogue closes.
z To cancel the settings, touch [Cancel].
10
11
Put a check mark in the “Valid” column.
11
Continued on next page
Item Explanation
O/D unit cyclic
Valid
The O/D unit cyclic function is enabled for the
selected outdoor unit if you put a check mark
here.
5
Touch [Register].
z The “Setting” dialogue closes.
z To cancel the settings, touch [Cancel].
5
6
Set other outdoor units.
z Repeat steps 3 to 5.
7
Touch [Timer set.].
z The “Term setting” dialogue is displayed.
7
8
Touch the number.
z You can set 4 different time slots.
8
Control operation at regular intervals [O/D unit cyclic]
To Next Page
Loading...
