EasyManua.ls Logo

Panasonic CZ-256ESMC3 - Settings for Energy Saving

Panasonic CZ-256ESMC3
230 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
76
Settings for energy saving
Energy saving
Settings for energy saving
This chapter explains how to make energy saving settings.
This unit is equipped with the e-CUT functions (temperature auto return, unattended auto shutoff, temperature
range limit, energy saving timer/efcient operation*).
The e-CUT functions reduce waste when air conditioning so that you can even save energy using existing air
conditioning units.
Screen menu Overview Page
Set temp. auto return
Even if the temperature initially set is changed, the temperature automatically returns to
the set one after a certain amount of time.
77
Unattended auto shutoff
If the air conditioning unit automatically stops at the set time but then is started again,
this setting automatically stops the unit again repeatedly at set intervals.
80
Set temperature range limit
Restrict the temperatures that can be set by setting upper and lower limits on
temperatures.
83
Energy saving timer/Efcient
operation setting*
You can specify time slots when you want operation capacity reduced. 85
Out unit silent setting
Set a time for the outdoor unit to operate at a lower level at night compared to the day. 87
Screen menu Overview Page
Register demand point
Register the demand point input. 89
I/D unit demand settings
You can automatically control indoor units by setting particular levels to cut the maximum
demand for electricity or maximum gas consumption.
90
O/D unit demand settings
You can automatically control outdoor units by setting particular levels to cut the
maximum demand for electricity or maximum gas consumption.
93
I/D unit cyclic
At specied intervals (3, 4, or 5 minutes), the thermostats of indoor units in control
groups are turned off and restored repeatedly in order.
98
O/D unit cyclic
At specied 10 minute intervals, the thermostats of outdoor units in control groups are
turned off and restored repeatedly in order.
102
Demand/peak shaving settings/
Peak cut settings*
Limit the electricity or gas consumed by outdoor units during the set time slot. 95
* When using gas heat pump air conditioners

Table of Contents

Other manuals for Panasonic CZ-256ESMC3

Related product manuals