Panasonic CZ-256ESMC3 - Operating the Indoor Unit

26
Check the operation and status of air conditioning units
Operation/Status
Operating the indoor unit
You can select indoor units to change settings, for example, start or stop them, or change their set
temperature, etc.. Change settings in the “Settings” dialogue.
You can also select multiple indoor units and operate them using the same settings.
4
Touch [Operation].
z The “Settings” dialogue is displayed.
4
Note
y There may be differences in the items you can set in the
“Settings” dialogue, depending on the model of the indoor
unit.
y When you have selected multiple units, setting items in
common are displayed in the “Settings” dialogue.
5
Change the settings of the items.
Common display area Operation display area
Select an item from the common display area and set the
operation in the operation display area.
Item Explanation
ON/OFF Set whether to start or stop operation.
1) Touch [ON/OFF].
2) Select “ON” or “OFF”.
Mode Set the operating mode.
1) Touch [Mode].
2)
Select the operating mode (
(heating),
(drying), (cooling), (fan),
(automatic)).
Continued on next page
1
Touch [Operation/Status] in “Oper./
Status”.
1
2
Touch [I/D unit list].
z The “I/D unit list” screen is displayed.
2
3
Put a check mark in the “Select” column.
z Select the indoor units whose settings you want to change.
z You can touch [Select all] to change the settings in a batch.
3