Panasonic CZ-256ESMC3 - Setting Delay Times [Delay Time Settings]

188
Conguring the Hybrid GHP/EHP control
Setting
Setting delay times [Delay time settings]
Make settings to delay control when the power or gas demand level either rises or falls.
The delay group setting content for each time slot corresponding to outdoor units is shown in graphs.
(Invalid: Grey / Group 1: Blue / Group 2: Red / Group 3: Green / Group 4: Light blue / Group 5: Yellow)
4
Put a check mark in the “Select” column.
z Select the outdoor units you want to edit.
4
5
Touch [Set].
z The operation dialogue is displayed.
5
Continued on next page
1
Touch [System Settings] in “Settings”.
z The “System settings” screen is displayed.
1
2
Touch [Hybrid GHP/EHP settings].
z Enter the identication number (password level 1 or 2) and
the “Hybrid GHP/EHP settings” screen is displayed.
2
3
Touch [Delay time settings].
z The “Delay time settings” screen is displayed.
3